prikaz prve stranice dokumenta Projektiranje tehnoloških procesa za CNC obradu spojke
  Download
PDF 5.48 MB
undergraduate thesis
Projektiranje tehnoloških procesa za CNC obradu spojke
2024. urn:nbn:hr:122:928217
Stojko, Lea
University North
University centre Varaždin
Department of Mechanical Engineering

Cite this document

Stojko, L. (2024). Projektiranje tehnoloških procesa za CNC obradu spojke (Undergraduate thesis). Koprivnica: University North. Retrieved from https://urn.nsk.hr/urn:nbn:hr:122:928217

Stojko, Lea. "Projektiranje tehnoloških procesa za CNC obradu spojke." Undergraduate thesis, University North, 2024. https://urn.nsk.hr/urn:nbn:hr:122:928217

Stojko, Lea. "Projektiranje tehnoloških procesa za CNC obradu spojke." Undergraduate thesis, University North, 2024. https://urn.nsk.hr/urn:nbn:hr:122:928217

Stojko, L. (2024). 'Projektiranje tehnoloških procesa za CNC obradu spojke', Undergraduate thesis, University North, accessed 28 September 2024, https://urn.nsk.hr/urn:nbn:hr:122:928217

Stojko L. Projektiranje tehnoloških procesa za CNC obradu spojke [Undergraduate thesis]. Koprivnica: University North; 2024 [cited 2024 September 28] Available at: https://urn.nsk.hr/urn:nbn:hr:122:928217

L. Stojko, "Projektiranje tehnoloških procesa za CNC obradu spojke", Undergraduate thesis, University North, Koprivnica, 2024. Available at: https://urn.nsk.hr/urn:nbn:hr:122:928217

Please login to the repository to save this object to your list.
Metadata
TitleProjektiranje tehnoloških procesa za CNC obradu spojke
Title (english)Technological processes design for CNC machining of cluch
AuthorLea Stojko
MentorMatija Bušić (mentor)
Committee memberTomislav Veliki (predsjednik povjerenstva)
Committee memberMatija Bušić (član povjerenstva)
Committee memberMarko Horvat (član povjerenstva)
GranterUniversity North
(University centre Varaždin)
(Department of Mechanical Engineering)
Koprivnica
Defense date and country2024-07-12, Croatia
Scientific / art field,
discipline and subdiscipline		TECHNICAL SCIENCES
Mechanical Engineering
Abstract
U ovom je radu prikazana izrada tehnološkog procesa za CNC obradu spojke u programu Mastercam 2024. U uvodom dijelu rada riječ je općenito o spojkama, proizvodnji te tijeku tehnološke pripreme proizvodnje. Ukratko su opisani postupci obrade odvajanjem čestica korišteni u procesu izrade, ali i važnost izbora režima obrade za postizanje optimalnog procesa. Za svaku od korištenih operacija navedeni su općeniti podatci o samoj tehnologiji, režimima obrade i alatima. U nastavku je prikazana izrada tehnološkog procesa popraćena režimima obrade za svaki zahvat te su priložene fotografije korištenih alata i simulacije. Na kraju rada stoji kratki osvrt o korištenim tehnologijama izrade te izabranom slijedu i ekonomičnosti proizvodnje. Izradu simulacije i spojke omogućila je tvrtka Sems d.o.o.
Abstract (english)
This paper presents the development of the technological process for CNC clutch processing in Mastercam 2024. The introductory part of the paper deals in general with clutches, production and technological preparation of production. The machining procedures used in the manufacturing process are briefly described, as well as the importance of choosing cutting conditions for achieving optimal process. General data on the technology itself, cutting conditions and tools are provided for each of the operations used. The development of the technological process accompanied by cutting conditions for each operation is presented below, and photographs of the tools and simulations used are enclosed. At the end of the paper, there is a brief overview of the manufacturing technologies used and the chosen production sequence and cost-effectiveness. Simulation and clutch were carried out by Sems d.o.o.
Keywords
Keywords (english)
Languagecroatian
URN:NBNurn:nbn:hr:122:928217
Study programmeTitle: Mechanical Engineering, with emphasis in Production Engineering
Study programme type: professional
Study level: undergraduate
Academic / professional title: prvostupnik/prvostupnica (baccalaureus/baccalaurea) inženjer/inženjerka strojarstva (prvostupnik/prvostupnica (baccalaureus/baccalaurea) inženjer/inženjerka strojarstva)
Type of resourceText
File originBorn digital
Access conditionsOpen access
Terms of useLicence In copyright icon
Created on2024-08-26 12:03:29