prikaz prve stranice dokumenta Ispitivanje mehaničkih svojstava uzoraka dobivenih 3D ispisom
  Download
PDF 2.42 MB
undergraduate thesis
Ispitivanje mehaničkih svojstava uzoraka dobivenih 3D ispisom
2024. urn:nbn:hr:122:175110
Babić, Ante
University North
University centre Varaždin

Cite this document

Babić, A. (2024). Ispitivanje mehaničkih svojstava uzoraka dobivenih 3D ispisom (Undergraduate thesis). Koprivnica: University North. Retrieved from https://urn.nsk.hr/urn:nbn:hr:122:175110

Babić, Ante. "Ispitivanje mehaničkih svojstava uzoraka dobivenih 3D ispisom." Undergraduate thesis, University North, 2024. https://urn.nsk.hr/urn:nbn:hr:122:175110

Babić, Ante. "Ispitivanje mehaničkih svojstava uzoraka dobivenih 3D ispisom." Undergraduate thesis, University North, 2024. https://urn.nsk.hr/urn:nbn:hr:122:175110

Babić, A. (2024). 'Ispitivanje mehaničkih svojstava uzoraka dobivenih 3D ispisom', Undergraduate thesis, University North, accessed 10 April 2025, https://urn.nsk.hr/urn:nbn:hr:122:175110

Babić A. Ispitivanje mehaničkih svojstava uzoraka dobivenih 3D ispisom [Undergraduate thesis]. Koprivnica: University North; 2024 [cited 2025 April 10] Available at: https://urn.nsk.hr/urn:nbn:hr:122:175110

A. Babić, "Ispitivanje mehaničkih svojstava uzoraka dobivenih 3D ispisom", Undergraduate thesis, University North, Koprivnica, 2024. Available at: https://urn.nsk.hr/urn:nbn:hr:122:175110

Please login to the repository to save this object to your list.
Metadata
TitleIspitivanje mehaničkih svojstava uzoraka dobivenih 3D ispisom
Title (english)Examination of the mechanical properties of samples obtained by 3D printing
AuthorAnte Babić
MentorZoran Busija (mentor)
Committee memberSiniša Švoger (predsjednik povjerenstva)
Committee memberZoran Busija (član povjerenstva)
Committee memberAnte Čikić (član povjerenstva)
GranterUniversity North
(University centre Varaždin)
Koprivnica
Defense date and country2024-09-20, Croatia
Scientific / art field,
discipline and subdiscipline		TECHNICAL SCIENCES
Mechanical Engineering
Abstract
U ovom završnom radu se provodi statičko vlačno ispitivanje na 3D ispisanim epruvetama koje su oblikovane prema standardu ISO 527-2. Epruvete su proizvedene korištenjem Zortrax M200 3D pisača iz različitih materijala, uključujući ABS, Z-ULTRAT i Z-PETG. Filament je tanka nit materijala, najčešće plastike, koja se koristi kao sirovina u 3D ispisu. Cilj istraživanja je bio analizirati utjecaj različitih materijala i postavki ispisa na mehanička svojstva uzoraka, s posebnim naglaskom na vlačnu... More čvrstoću i modul elastičnosti. Statičko vlačno ispitivanje provedeno je korištenjem kidalice Inspekt Blue 20, koja omogućava precizno mjerenje sila potrebnih za rastezanje epruveta do njihovog loma. Rezultati ispitivanja pružili su usporedbu mehaničkih svojstava uzoraka izrađenih različitim materijalima, što omogućuje detaljan uvid u njihovu čvrstoću i otpornost na deformacije. Zaključak istraživanja naglašava značajan utjecaj vrste materijala i parametara 3D ispisa na mehaničke karakteristike ispitivanih epruveta, što je od posebne važnosti za industrijsku primjenu 3D ispisanih dijelova. Less
Abstract (english)
In this thesis, static tensile testing is conducted on 3D printed specimens shaped according to the ISO 527-2 standard. The specimens were produced using a Zortrax M200 3D printer and filaments made from different materials, including ABS, Z-ULTRAT, and Z-PETG. Filament is a thin strand of material, most commonly plastic, used as a raw material in 3D printing. The aim of the research was to analyze the impact of different materials and printing settings on the mechanical properties of the... More samples, with a particular focus on tensile strength and elastic modulus. The static tensile test was performed using an Inspekt Blue 20 testing machine, which allows precise measurement of the forces required to stretch the specimens until their fracture. The test results provided a comparison of the mechanical properties of the samples made from various materials, offering detailed insight into their strength and resistance to deformation. The conclusion of the research highlights the significant influence of material type and 3D printing parameters on the mechanical characteristics of the tested specimens, which is of particular importance for the industrial application of 3D printed parts. Less
Keywords
Keywords (english)
Languagecroatian
URN:NBNurn:nbn:hr:122:175110
Study programmeTitle: Mechatronics
Study programme type: professional
Study level: undergraduate
Academic / professional title: prvostupnik/prvostupnica (baccalaureus/baccalaurea) inženjer/inženjerka mehatronike (prvostupnik/prvostupnica (baccalaureus/baccalaurea) inženjer/inženjerka mehatronike)
Type of resourceText
File originBorn digital
Access conditionsOpen access
Terms of useLicence In copyright icon
Created on2024-10-10 13:47:49
accessibility

closeAccessibilityrefresh

If you wish to permanently save changes, click on Save, if not - your settings will be reset when you restart the browser.