prikaz prve stranice dokumenta Utjecaj parametara plazma rezanja na vlačnu čvrstoću aluminijeve legure EN AW 1050A
  Download
PDF 2.17 MB
master's thesis
Utjecaj parametara plazma rezanja na vlačnu čvrstoću aluminijeve legure EN AW 1050A
2023. urn:nbn:hr:122:785170
Cepanec, Alen
University North
University centre Varaždin
Department of Mechanical Engineering

Cite this document

Cepanec, A. (2023). Utjecaj parametara plazma rezanja na vlačnu čvrstoću aluminijeve legure EN AW 1050A (Master's thesis). Koprivnica: University North. Retrieved from https://urn.nsk.hr/urn:nbn:hr:122:785170

Cepanec, Alen. "Utjecaj parametara plazma rezanja na vlačnu čvrstoću aluminijeve legure EN AW 1050A." Master's thesis, University North, 2023. https://urn.nsk.hr/urn:nbn:hr:122:785170

Cepanec, Alen. "Utjecaj parametara plazma rezanja na vlačnu čvrstoću aluminijeve legure EN AW 1050A." Master's thesis, University North, 2023. https://urn.nsk.hr/urn:nbn:hr:122:785170

Cepanec, A. (2023). 'Utjecaj parametara plazma rezanja na vlačnu čvrstoću aluminijeve legure EN AW 1050A', Master's thesis, University North, accessed 13 November 2024, https://urn.nsk.hr/urn:nbn:hr:122:785170

Cepanec A. Utjecaj parametara plazma rezanja na vlačnu čvrstoću aluminijeve legure EN AW 1050A [Master's thesis]. Koprivnica: University North; 2023 [cited 2024 November 13] Available at: https://urn.nsk.hr/urn:nbn:hr:122:785170

A. Cepanec, "Utjecaj parametara plazma rezanja na vlačnu čvrstoću aluminijeve legure EN AW 1050A", Master's thesis, University North, Koprivnica, 2023. Available at: https://urn.nsk.hr/urn:nbn:hr:122:785170

Please login to the repository to save this object to your list.
Metadata
TitleUtjecaj parametara plazma rezanja na vlačnu čvrstoću aluminijeve legure EN AW 1050A
Title (english)The influence of plasma cutting parameters on the tensile strength of EN AW 1050A aluminum alloy
AuthorAlen Cepanec
MentorMatija Bušić (mentor)
Committee memberTanja Tomić (predsjednik povjerenstva)
Committee memberMatija Bušić (član povjerenstva)
Committee memberSven Maričić (član povjerenstva)
GranterUniversity North
(University centre Varaždin)
(Department of Mechanical Engineering)
Koprivnica
Defense date and country2023-09-27, Croatia
Scientific / art field,
discipline and subdiscipline		TECHNICAL SCIENCES
Mechanical Engineering
Abstract
U teorijskom dijelu ovog diplomskog rada navedeni su osnovni toplinski postupci rezanja. Ukratko su opisani postupci plinskog i laserskog rezanja, a posebno je opisan postupak plazma rezanja. Navedene su i ukratko objašnjene različite metode plazma rezanja te tehnički plinovi koji se koriste u procesu plazma rezanja. Definirani su glavni parametri plazma rezanja i oprema koja se koristi za plazma rezanje. Navedene su specifičnosti kod rezanja aluminija. Na kraju teoretskog dijela opisan je postupak statičkog vlačnog ispitivanja. U eksperimentalnom dijelu opisan je postupak plazma rezanja lima aluminija EN AW 1050A pri različitim parametrima brzine rezanja i jakosti struje. Opisana je korištena oprema i navedene su tehničke specifikacije. Na izrezanim uzorcima je provedeno statičko vlačno ispitivanje i utvrđen je utjecaj plazma rezanja na vlačnu čvrstoću aluminija. Na kraju rada iznesen zaključak i osvrt na dobivene rezultate eksperimenta.
Abstract (english)
In the theoretical part of this master's thesis, basic thermal cutting processes are discussed. Gas cutting and laser cutting procedures are briefly described, with special emphasis on the plasma cutting process. Various plasma cutting methods and the technical gases used in the plasma cutting process are outlined and briefly explained. The main parameters of plasma cutting and the equipment used for plasma cutting are defined. Specific considerations when cutting aluminum are also provided. Finally, the theoretical section concludes with a description of the static tensile testing procedure. In the experimental part, the process of plasma cutting of aluminum sheet EN AW 1050A at different cutting speed and current intensity parameters is described. The equipment used is detailed, along with its technical specifications. Static tensile tests were performed on the cut samples to determine the impact of plasma cutting on the tensile strength of aluminum. The thesis concludes with a summary and reflection on the obtained experimental results.
Keywords
Keywords (english)
Languagecroatian
URN:NBNurn:nbn:hr:122:785170
Study programmeTitle: Mechanical engineering
Study programme type: university
Study level: graduate
Academic / professional title: sveučilišni magistar/magistra inženjer/inženjerka strojarstva (sveučilišni magistar/magistra inženjer/inženjerka strojarstva)
Type of resourceText
File originBorn digital
Access conditionsOpen access
Terms of useLicence In copyright icon
Created on2023-11-23 17:30:32