prikaz prve stranice dokumenta Konstrukcija kalupa za izradu gumene brtve
  Download
PDF 6.75 MB
master's thesis
Konstrukcija kalupa za izradu gumene brtve
2022. urn:nbn:hr:122:837856
Delić, Nikola
University North
University centre Varaždin
Department of Mechanical Engineering

Cite this document

Delić, N. (2022). Konstrukcija kalupa za izradu gumene brtve (Master's thesis). Koprivnica: University North. Retrieved from https://urn.nsk.hr/urn:nbn:hr:122:837856

Delić, Nikola. "Konstrukcija kalupa za izradu gumene brtve." Master's thesis, University North, 2022. https://urn.nsk.hr/urn:nbn:hr:122:837856

Delić, Nikola. "Konstrukcija kalupa za izradu gumene brtve." Master's thesis, University North, 2022. https://urn.nsk.hr/urn:nbn:hr:122:837856

Delić, N. (2022). 'Konstrukcija kalupa za izradu gumene brtve', Master's thesis, University North, accessed 30 November 2024, https://urn.nsk.hr/urn:nbn:hr:122:837856

Delić N. Konstrukcija kalupa za izradu gumene brtve [Master's thesis]. Koprivnica: University North; 2022 [cited 2024 November 30] Available at: https://urn.nsk.hr/urn:nbn:hr:122:837856

N. Delić, "Konstrukcija kalupa za izradu gumene brtve", Master's thesis, University North, Koprivnica, 2022. Available at: https://urn.nsk.hr/urn:nbn:hr:122:837856

Please login to the repository to save this object to your list.
Metadata
TitleKonstrukcija kalupa za izradu gumene brtve
Title (english)Construction for a mold for making a rubber seal
AuthorNikola Delić
MentorZlatko Botak (mentor)
Committee memberMatija Bušić (predsjednik povjerenstva)
Committee memberZlatko Botak (član povjerenstva)
Committee memberTomislav Veliki (član povjerenstva)
GranterUniversity North
(University centre Varaždin)
(Department of Mechanical Engineering)
Koprivnica
Defense date and country2022-07-13, Croatia
Scientific / art field,
discipline and subdiscipline		TECHNICAL SCIENCES
Mechanical Engineering
Abstract
U diplomskom radu prikazan je postupak izrade gumene brtve vulkanizacijom u kalupu. Najprije će se izraditi prototip brtve tehnologijom 3D printa, koji će kasnije poslužiti za provjeru dimenzija brtve. Nakon toga prikazana je konstrukcija i izrada kompresijskog (klasičnog) kalupa s jednim gnijezdom, te izrada gumene brtve vulkanizacijom od odabrane smjese. Također je opisan odabir odgovarajuće gumene smjese ovisno o uvjetima eksploatacije brtve. Na kraju će biti prikazana konstrukcija injekcijskog kalupa s više gnijezda, koji bi se koristio u slučaju velikoserijske narudžbe brtvi, npr. 2000 ili više komada. Za izradu 3D modela brtve i kalupa te za izradu tehničke dokumentacije korišten je programski paket SolidWorks 2020, dok je za postprocesiranje prilikom 3D printa korišten program Ultimaker Cura 4.13.
Abstract (english)
This master's thesis will present the production of a rubber seal by vulcanization in a mold. First, a prototype of the seal will be made by 3D printing technology, which will be used to make a dimensional check of the seal. Then, the construction and production of a compression (classic) mold with one nest and the production of a rubber seal by vulcanization of the selected mixture will be presented. The selection of the appropriate rubber compound depending on the operating conditions of the seal will be shown. Finally, the construction of a multi-nest injection mold will be shown as would be used in the case of a large-scale order of seals, eg 2000 or more pieces. The SolidWorks 2020 software package was used to create the 3D model of the seal and the mold and to create the technical documentation, while theUltimaker Cura 4.13 software was used to post-process the 3D print.
Keywords
Keywords (english)
Languagecroatian
URN:NBNurn:nbn:hr:122:837856
Study programmeTitle: Mechanical engineering
Study programme type: university
Study level: graduate
Academic / professional title: magistar/magistra inženjer/inženjerka strojarstva (magistar/magistra inženjer/inženjerka strojarstva)
Type of resourceText
File originBorn digital
Access conditionsOpen access
Terms of useLicence In copyright icon
Created on2023-02-02 18:45:16